注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

杭州溜冰鞋

联系人:翁利文 QQ:85111570 手机:13758243050

 
 
 

日志

 
 

FAG deep groove ball bearings that could reasonably functional ways  

2013-12-04 17:18:22|  分类: 技术 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |

   大部分的深沟球轴承的工作性质,就是在机械零件中,为轴承留下适当的间隙,让机器上的轴承去把其它零件给支撑起来然后也能够运转起来。也有一样的型号,依据不同的工作用处,来选择适合的FAG轴承。提早使用轴承的内部作用力,让轴承利用间隙来运转起来,这种方法叫做超负荷力。可以了解轴承的使用情况,进行合适的调整一下,从而使轴承更加顺利的运转起来。那么,运用轴承超负荷力的主要目的是什么?
Most of the nature of the work of deep groove ball bearings, are mechanical parts, leave proper clearance for bearings, bearings on the machine parts to other propped up and then to be able to work. Also have the same model, depending on use, to select suitable FAG bearings. Early bearing of internal forces, bearing clearances to work, this approach is called overloading. Skill usage, make the appropriate adjustments, to make housing more up and running smoothly. Then, use bearing overload-what is the main purpose of the force?

   控制移动的轴。在深沟球轴承一点点挪动的时候,可能会因为一些特殊的原因,不要让FAG轴承过于动起,影响到工作的正常运行。运用超负荷力的方法,让轴承以正确的目标运转,从而控制住要移动的轴承。
To control movement of the shaft. Deep groove ball bearings a little when I moved, may be due to some special reasons, do not let the FAG bearings too, affecting normal operation. Use overloaded methods, bearing to the right target run, thus bearing of the control you want to move.

   要把轴承的一些指标给提高上去。轴承用到的主要原料要经过挑选在用,合理的运用超负荷力的方法,也就可以很好的加深FAG轴承的刚性了。保证运动体的正确位置:不同型号的轴承,在工作中,会出现不同的作用。每个轴承都会有运动体,但是运动体会跟着轴承的自转而旋转,只有使用正确的超负荷力的方法,才能确定运动体的正确地方。
To improve bearing some of the indicators. Bearing is to be selected in the main raw materials used, reasonable use of overloaded methods, it can be a good understanding of FAG bearings stiff. Ensure correct position of the moving body: different types of bearings, on the job, different effects can occur. Each bearing has movement, movement experience with rotation of the bearing and rotate, only if you are using the correct overload method to determine the correct parts of the moving body.

   拧上FAG轴承上的丝钉:用适当的超负荷力的方法,不仅可以拧紧轴承上的钉子,还可以调整钉子之间的轴方向,以便拉开摩擦力的距离,尽可能避免过多摩擦造成轴承损坏。防止有不同的声音发生什么振动:一些深沟球轴承在转的时候,会出现许多不同音振动或共振,这样就容易改变到轴承的轴力的方向了,让轴承到最后没办法正常运行,通过超负荷力的方法,可以防止或者是减小这些音的发生。
Screw on the FAG bearing wire nails: with the appropriate overloaded method, you can not only tighten the bearing of the Spike, you can also adjust the axis between nails in order to pull the friction of distance, to the extent possible to avoid bearing damage caused by excessive friction. Different voices prevent any vibration: deep groove ball bearings at the time of transfer, there will be a lot of different sound vibration or resonance, so that it is easy to change in the direction of the bearing axis, bearings in the end there's no way to work, through the overloaded methods can prevent or reduce the occurrence of these tones.

  评论这张
 
阅读(98)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017