注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

杭州溜冰鞋

联系人:翁利文 QQ:85111570 手机:13758243050

 
 
 

日志

 
 

INA bearing inspection what should I do to prepare before work  

2012-09-05 13:53:56|  分类: 技术 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |
当我们对INA轴承进行检查前,应当先清洁轴承的表面,然后拆卸轴承周边的零件。大家要注意,油封是很脆弱的零件,因此在检查和拆装时需要格外的小心,切勿过度施力,以免造成零件的损坏。然后仔细的检查INA轴承的油封及其周边的零件,其次,我们还要检查INA轴承的润滑剂。
When we examine INA bearing the former, you should clean the bearing surface, and then disassembling bearing parts around. We should pay attention to, is very fragile parts oil seal, and therefore require extra care in inspections and disassembly, not excessive force, so as not to cause damage to parts. And then carefully check the INA bearing oil seal and its surrounding parts, and secondly, we also check INA bearing lubricant.
润滑是很重要的,不光是针对INA轴承,也针对所有的轴承。但是请注意,INA轴承不宜加过多润滑脂。
Lubrication is very important, not only for INA bearings, bearings for all. Please note however, INA bearings should not be adding too much grease.
由于国内目前的防锈技术还不是十分完善,所以对INA轴承进行防锈处理时很容易留下厚厚的油迹,拿在手上粘粘稠稠,表面油迹十分浑浊。这在购买轴承时应该特别注意。而国外原装INA轴承上几乎看不到防锈油的痕迹,而且INA轴承闻起来有一种味道,是已经经过防锈油处理留下的,只是看不到而已。
Rust prevention of domestic current technology is still not very perfect, so the INA bearing rust easily when leaving a thick grease, sticky thick heavy in the hand, oil traces on the surface very turbid. This at the time of purchase bearing should pay special attention. Genuine INA bearings in foreign countries hardly see the traces of rust preventive oil, and smells a taste of INA bearing, is processed by the antirust oil left, just not see it.
  评论这张
 
阅读(69)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017