注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

杭州溜冰鞋

联系人:翁利文 QQ:85111570 手机:13758243050

 
 
 

日志

 
 

Lubricating quality effectively extend the life of INA bearing  

2012-09-18 11:04:45|  分类: 技术 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |

INA轴承在保养时,过多的润滑脂其实有很多危害。因为润滑脂具有很好的黏附性、耐磨性、耐温性、防锈性和润滑性,能够提高高温抗氧化性,延缓老化,能溶解积碳,防止金属磨屑和油污的结聚,提高机械的耐磨、耐压和耐腐蚀性。
INA bearing in maintenance, excessive grease has a lot of harm. Because the grease has good adhesion, abrasion resistance, temperature resistance, corrosion resistance and lubricity to improve high-temperature oxidation resistance of, postpone aging, dissolves carbon, prevent the junction of metal wear debris and oil accumulation, the mechanical wear resistance, pressure resistance, and corrosion resistance.
1、轴承的安装
INA轴承的安装是否正确,影响着精度、寿命、性能。因此,设计及组装部门对于INA轴承的安装要充分研究。希望要按照作业标准进行安装。作业标准的项目通常如下
1, axle bearing installation
INA bearing is properly installed, which will affect accuracy, longevity, performance. Therefore, design and Assembly departments for INA bearings installed to fully study. Want to be installed in accordance with operational standards. Job standards projects often are as follows
2、轴承基本的条件监测
在使用期间, 要经常对INA轴承运行的基本外部条件进行监测, 譬如温度, 振动和噪音的测量等等。这些有规律的检查将及早发现潜在的问题并将防止出现意想不到的机器中止现象, 使生产计划得以实现, 提高的工厂生产力和效率。
:2, bearing basic condition monitoring
During use, you should always run basic monitoring of external conditions on the INA bearing, such as temperature, vibration and noise measurement, and so on. These regular checks for early detection of potential issues and prevent unexpected machine halt, make production plans to materialize, increase factory productivity and efficiency.
3、对轴承的再次润滑
在运作过程中, INA轴承要求有正确的再次润滑,完美它的表现。INA轴承润滑的方法,分为脂润滑和油润滑。为了使轴承很好地发挥机能,首先,要选择适合使用条件、使用目的的润滑方法。若只考虑润滑,油润滑的润滑性占优势。但是脂润滑有可以简化轴承周围结构的特长。
3, again for bearing lubrication
In the course of operation, INA bearings require proper lubrication once again, perfect its performance. INA bearing lubrication method, divided between grease lubrication and oil lubrication. For bearings properly to work functions, first of all, to select the appropriate conditions of use, the use of the purpose of lubrication method. If only consider lubrication, oil lubrication of lubrication advantage. But grease lubrication around bearing structure can be simplified like that.
4、轴承的卸载
当INA轴承将到达它的最终使用期限的时候,就应该被替换掉。
虽然INA轴承不可以再被使用, 但正确地卸下原来的INA轴承,及时替换新的轴承,对新轴承使用寿命的延长能起到很好的促进作用。
4, bearing the unloading
When INA bearing reaches its final age when they should be replaced.
Although INA bearings can no longer be used, but rightly removed the INA bearings, replace new bearings in a timely manner, the new extension of the service life of the bearings can play a good role in promoting.

  评论这张
 
阅读(77)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017