注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

杭州溜冰鞋

联系人:翁利文 QQ:85111570 手机:13758243050

 
 
 

日志

 
 

IKO bearing lubrication guide often exclude the important role  

2012-09-18 11:10:17|  分类: 技术 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |

一般来讲,IKO轴承在开始运转后会升温,经过一段时间,即以较低温度(通常比室温高10~40度)处于常态。至常态的时间,则根据轴承大小、形式、旋转速度、润滑方法,IKO轴承周围放热条件变化而不同,此时大致需要20分钟至几小时不等。
In General, IKO bearings starts running after warming, after a period of time, that is at a lower temperature (usually higher than room temperature 10~40du) is in the normal state. Time to normal, depending on bearing size, format, rotation speed, method of lubrication, IKO bearings heat around different conditions change, you generally need 20 minutes to a few hours.
IKO轴承温度未达到常态而出现异常升温时,可考虑以下几点原因,此外应尽快停机且采取必要对策。温度对保持IKO轴承的适当寿命及防止润滑油的劣化等至关重要,建议:尽量控制在非高温状态下(一般为100度以下)使用最为理想。异常温度上升的主要原因 润滑油过多或过少。IKO轴承的安装不良。轴承内部间隙过小,或负荷过大。密封装置摩擦过大。 润滑剂不符。 配合面的蠕变。
IKO bearings when the exception occurs, normal warming temperature is not reached, following several reasons could be considered, in addition should stop as soon as possible and to take the necessary measures. Temperature on the IKO bearing proper life and prevent deterioration of lubricant is essential, it is recommended that: try to control non-under high temperature (normally below 100) using the most ideal. Main causes of abnormal temperature rise of lubricating oil too much or too little. IKO bearing installation from malnutrition. Bearing internal clearance is too small, or the load is too large. Sealing device too much friction. Lubricants do not match. Creep of the mating surfaces.
1、首先是润滑IKO轴承的各部分,减小轴承的摩擦和磨损;
1, first of all parts of the IKO bearings lubricated, reduces friction and wear of the bearing;
2、使轴承的滚动接触面经常形成适当的油膜,延长IKO轴承的疲劳寿命;
2, so that the bearing of the rolling contact surfaces often develop appropriate oil film, IKO bearing fatigue life extension;
3、通过润滑带走了轴承内部因摩擦或其他原因产生的热量;
3, through the lubrication bearing internal heat generated due to friction or other reasons;
4、通过润滑可对IKO轴承达到防锈和防尘的作用。
4, rust-proof and dust-proof through the lubricated to IKO bearings.
因此,我们要正确的认识到润滑对于IKO轴承的重要性,提高轴承的性能,减少消耗。
Therefore, we have to a proper understanding of the importance of lubrication for IKO bearings, improve bearing performance, reduce consumption.

  评论这张
 
阅读(78)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017